Safe operating procedures for micro tiller

I have organized the safety points for operating a micro tiller for you, and the core is one sentence: standardized operation and constant vigilance. The following key steps and precautions must be remembered:

1、 Preparation before operation
Check the machine status: Confirm that the oil level is sufficient, the screws are tightened, and the rotating parts are properly protected. When installing the plow blade, it should be symmetrical on both sides with the blade facing forward.
Wear protective equipment: Wear tight fitting clothing and work hats to avoid long hair or clothing getting caught up.
Environmental confirmation: Clean up debris in the work area, ensure that no children or pets are near, and ensure that the slope of the slope does not exceed 25 degrees.
2、 Startup and Homework
Before starting: shift to neutral, disengage the power transmission, and then idle for 5-10 minutes before starting again.
In homework:
Do not touch rotating tools or clean debris with bare hands.
When working along the uphill and downhill directions on a slope, the machine must be stopped and the resistance rod must be removed before shifting in reverse.
Do not exceed the speed limit, make sharp turns, or carry passengers or cargo.
3、 Maintenance and Storage
Regular maintenance: Clean the machine, inspect components, and replace vulnerable parts such as blades in a timely manner.
Long term storage: Perform intermittent maintenance to ensure reliability and safety.
4、 Urgent handling
When the phenomenon of speeding occurs, immediately cut off the fuel supply or plug it into the airway to turn off the engine.
When the plow blade is tangled with grass or the engine makes abnormal noises, immediately stop the machine for inspection.

Special attention: Operators must undergo training and are strictly prohibited from working under fatigue, alcohol, or illness. No work is allowed at night without lighting. When adding fuel, the machine must be stopped and kept away from sources of fire